EMS - Industrial Sensors and Controls 

Home Products Order Contact
1-800-5140-EMS (367) Economical Solutions - Reliable Products - Personal Service
Sentry Calibrator - $75

2 point current loop sensor calibrator

DIN rail or wall mount

manual

  Particularly useful to calibrate onsite with minimum process interruption.

 

Program the Sentry calibrator to compensate for older or out of tolerance sensors.
FEATURES  
                DIN rail  or wall mounting
  Drives loads from 100-500 ohms
  Operates from 16-30VDC
  Sensor circuitry optically isolated from USB and output
  Compensation from -50% to +100% each point
  10 microamp resolution (4.00 to 20.00)
   

 

 

  MECHANICAL - DIN Rail
   
  MECHANICAL - Box
   

 

WIRING  
 Sentry

Calibrator

 

 

SPECIFICATIONS Sentry Calibrator
INPUT Two wire or three wire current loop sensor 
POWER +24VDC @ 50mA
OUTPUT  Two wire 4-20mA
HOUSING 1/2" x 3" - 35mm DIN Rail or 3 1/4" x 2" x 1 1/2" box
TEMPERATURE -20 / 145 degree F

 

Part Number Codes

Descriptions

SC-DIN Sentry Calibrator DIN rail mount - $75
SC-WALL Sentry Calibrator wall mount - $75
USB35MM USB programming cable - $20

 

The Sentry Calibrator provides a low cost method to obtain better performance from older sensors or less accurate newer sensors. A low cost sensor that has +/- 2% accuracy but is repeatable may be brought into +/- .5% accuracy by using the Sentry Calibrator. The Sentry Calibrator also provides a way to perform sensor calibration "in circuit" with minimum system down time. Both DIN rail and wall mount options are available.

 

EMS  47745 - 193rd St. Toronto SD 57268 USA (605) 794-2072 (P)     (605) 794-2073 (F)  email