EMS - Industrial Sensors and Controls
|1-800-5140-EMS (367)||Economical Solutions - Reliable Products - Personal Service|
HVAC air quality
|current loop or voltage output||CO2101-5V|
|Three wire 0-5000 ppm|
|Low cost CO2 level measurement for PLCs and control systems|
|+/- 4% accuracy|
|Dual beam for long term stability|
|Reverse polarity protected|
|RANGE||0-5000 ppm||0-5000 ppm|
|ACCURACY||+/- 4%||+/- 4%|
|Current loop (4-20mA) two wire||Voltage output 0-5V|
Part Numbers CO2101-420, CO2101-5V
The CO2101 is a low cost way to input CO2 information into a PLC, process control meter, distributed control system (DCS), SCADA, or other industrial control system. The CO2101 can be wall mounted and connected via instrumentation cable to almost any control or monitoring system that takes analog signals.
Because the CO2101 has a plastic housing, care should be taken to insure that the operating environment does not get so hot that the housing will soften. This may happen at temperatures around 180 to 190 degrees F.
The CO2101 should not be used as the sole sensing element in critical equipment or safety applications.
EMS 47745 - 193rd St. Toronto SD 57268 USA (605) 794-2072 (P) (605) 794-2073 (F) email