EMS - Industrial Sensors and Controls
|1-800-5140-EMS (367)||Economical Solutions - Reliable Products - Personal Service|
(2 wire - loop powered)
|15A - 50A - 100A|
|AC Current Sensor - $15
AC Current Transmitter - $40
|Snap-on measurement of AC current in panels, motors, pumps, etc.|
|Two wire current loop (4-20 mA) (loop powered)|
|Galvanically isolated for safety|
|Low cost AC current measurement for PLCs and control systems|
|0-15A, 0-50A and 0-100A ranges|
|+/- 2% accuracy|
|Reverse polarity protected|
|Stand Alone Housing|
|DIN Rail Module|
|RANGE||0-15A, 0-50A, 0-100A|
|Current loop (4-20mA) two wire|
ACCT1 for the transmitter (box type)
ACCT1-DIN for the DIN rail version
ACCsensor-15 for the 0-15A sensor
ACCsensor-50 for the 0-50A sensor
ACCsensor-100 for the 0-100A sensor
The ACCT1 is a low cost way to input AC current information into a PLC, process control meter, distributed control system (DCS), or other industrial control system. The ACCT1 can be mounted through any flat surface and the two wires connected to an analog input card or other two wire 4-20 mA current loop circuit.
The ACCT1 is designed for low cost applications where standard accuracy is acceptable.
Because the ACCT1 has a ABS housing, care should be taken to insure that the operating environment does not get so hot that the ABS housing will soften. This may happen at temperatures around 180 to 190 degrees F.
The ACCT1 should not be used as the sole sensing element in critical equipment or safety applications.
EMS 47745 - 193rd St. Toronto SD 57268 USA (605) 794-2072 (P) (605) 794-2073 (F) email